Ag nanoparticles-polypyrrole-carbon black/mesoporous TiO2 novel nanocomposite as ultrafast visible-light-driven photocatalyst

Effective design and fabrication of novel visible light-oriented photocatalysts is an existing challenging task that requires further dedicated efforts, and it has been always a main concern among the scientific community. This study deals with the design and fabrication of an extremely active and ultrafast ternary photocatalyst based on Ag nanoparticles, polypyrrole doped carbon black (PPy-C) and mesoporous TiO₂ (m-TiO₂). Sol-gel methodology along with sonication and photodeposition routes have been employed for the successful creation of the ternary framework. Ternary photocatalyst composed of uniform spherical titania nanoparticles (10–15 nm in size) perfectly intermingled with the polymeric linkage of PPy-C. Fruitful creation of unique trio photocatalyst between AgNPs, PPy-C and m-TiO₂ was confirmed by XPS and XRD. FTIR analysis further supports the development of nanocomposite photocatalyst. TEM analysis showed uniform spherical m-TiO₂ nanoparticles (10–15 nm in size) covered by PPy-C with compact nodes like appearance interlocked very well among each other. The newly developed Ag@PPy-C/m-TiO₂ ternary photocatalyst exhibited band gap energy in desired visible range of spectra. The photocatalytic efficiency for all created photocatalysts has been evaluated taking Imidacloprid (insecticide derivative) and methylene blue (MB) dye as target pollutants. The novel Ag@PPy-C/m-TiO₂ photocatalyst produced astonishing results with ultrafast removal of both Imidacloprid as well MB dye under visible light irradiation. The newly created ultrafast Ag@PPy-C/m-TiO₂ photocatalyst has removed 96.0% of the insecticide Imidacloprid in only 25 min with almost ? 2.65 times more efficient than bare m-TiO₂ towards the removal of insecticide derivative. The present report offers a highly encouraging and vastly talented Ag@PPy-C/m-TiO₂ ternary photocatalyst, enabling the ideal management of extremely lethal and notorious chemicals.     

The suppression of dark current for achieving high-performance Ga2O3 nanorod array ultraviolet photodetector

Gallium oxide (Ga₂O₃) is a promising candidate for next-generation solar-blind photodetectors (PDs) because of its large bandgap of 4.9 eV. Its single-crystal nanorod structure improves its photoelectric performance, which promotes carrier transformation and separation. However, Ga₂O₃ nanorods fabricated by the hydrothermal method have many oxygen vacancies, which largely enhance the dark current and reduce the on/off ratio of PDs, restricting application of such devices. Therefore, in this paper, dual strategies are applied to reduce the dark current of a metal–semiconductor–metal-structured Ga₂O₃ nanorod PD fabricated by the hydrothermal method. Through these dual strategies, which include annealing treatment and the application of a polymethyl methacrylate (PMMA) coating, the dark current of the PD is reduced from 1.34 × 10^?7 to 2.04 × 10^?9 A at 1 V, resulting in the on/off ratio of the PD reaching as high as 3.24 × 10⁴. Besides, the responsivity and detectivity of the device reach 1.73 A/W and 2.53 × 10¹² Jones respectively, which represents better performance than those of other reported Ga₂O₃ nanorod array PDs. Results have shown that the new strategy adopted can greatly improve the performance of Ga₂O₃-based ultraviolet photodetectors.     

Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method

The longitudinal residual stresses in the friction stir-welded plates of 5A06 aluminium and pure copper were determined using the contour method. The results revealed the presence of high tensile and compressive residual stresses on the aluminium and copper sides, respectively. The residual stresses were detected on the weld zone as well as the thermo-mechanically affected zone (TMAZ) of the aluminium plate. In contrast, the compressive residual stresses in the copper plate had a much narrower width along the weld line. Peak tensile stresses up to 240?MPa were found in the TMAZ of the aluminium plate.     

Elemental analysis of cemented carbides by calibration-free portable laser-induced breakdown spectroscopy

The process of cemented carbides manufacturing requires rapid and field elemental analytical techniques to control and evaluate the properties of products. Calibration-free laser-induced breakdown spectroscopy (CF-LIBS) is such a potential elemental analytical technique. In this work, a portable LIBS instrument combined with a CF method was developed for the analysis of cemented carbides. Three batches of cemented compact carbides without reference samples were analyzed. Qualitative and quantitative analysis of the samples were achieved by using the portable LIBS instrument combined with CF method. To validate the analysis results, X-ray fluorescence spectrometry (XRF) was used to analyze the samples as well. The results of CF-LIBS agreed well with the results of XRF, with relative errors between ?29.53 and 24.70%. The results demonstrated that the portable LIBS instrument combined with CF method was capable for direct and rapid analysis without any need of standard measurements. Notably, with the portable LIBS instrument combined with CF method, acceptable accuracy could be obtained, which is promising for practical field applications.     

卡尔费休法测定液态氯乙烯中水含量的研究

采用卡尔费休法测定了液态氯乙烯单体中的水含量。试验确定了采样工具、样品的预处理方式及选用溶剂的最优方案,并进行了精密度与准确度的验证。结果表明卡尔费休法测定液态氯乙烯单体中的水含量准确、快速,可以用来准确、及时地指导生产。     

Studies on spinel cobaltites,MCo2O4 (M = Mn,Zn, Fe,Ni and Co) and their functional properties

Optimization of electrodes for charge storage with appropriate processing conditions places significant challenges in the developments for high performance charge storage devices. In this article, metal cobaltite spinels of formula MCo₂O₄ (where M = Mn, Zn, Fe, Ni and Co) are synthesized by oxalate decomposition method followed by calcination at three typical temperatures, viz. 350, 550, and 750 °C and examined their performance variation when used as anodes in lithium ion batteries. Phase and structure of the materials are studied by powder x-ray diffraction (XRD) technique. Single phase MnCo2O4,ZnCo2O4 and Co3O4 are obtained for all different temperatures 350 °C, 550 °C and 750 °C; whereas FeCo₂O₄ and NiCo₂O₄ contained their constituent binary phases even after repeated calcination. Morphologies of the materials are studied via scanning electron microscopy (SEM): needle-shaped particles of MnCo₂O₄ and ZnCo₂O₄, submicron sized particles of FeCo₂O₄ and agglomerated submicron particle of NiCo₂O₄ are observed. Galvanostatic cycling has been conducted in the voltage range 0.005–3.0 V vs. Li at a current density of 60 mA g^?1 up to 50 cycles to study their Li storage capabilities. Highest observed charge capacities are: MnCo₂O₄ – 365 mA h g^?1 (750 °C); ZnCo₂O₄ – 516 mA h g^?1 (550 °C); FeCo₂O₄ – 480 mA h g^?1 (550 °C); NiCo₂O₄ – 384 mA h g^?1 (750 °C); and Co₃O₄ – 675 mA h g^?1 (350 °C). The Co₃O₄ showed the highest reversible capacity of 675 mA h g^?1; the NiO present in NiCo₂O₄ acts as a buffer layer that results in improved cycling stability; the ZnCo₂O₄ with long needle-like shows good cycling stability.     

高效可撤销的身份基在线离线加密方案

身份基加密（IBE）需要提供一种有效的成员撤销机制，然而，现有可撤销成员的IBE方案存在密钥更新和加密运算量过大的问题，可能使执行该操作的设备成为系统的瓶颈。将完全子树方法和在线离线技术相结合，通过修改指数逆类型IBE的密钥生成和加密算法，提出了一种高效可撤销的身份基在线离线加密方案。方案利用完全子树方法生成更新钥，使得撤销用户无法获得更新钥，进而失去解密能力；利用在线离线技术，将大部分加密运算在离线阶段进行预处理，使得在线阶段仅执行少量简单计算即可生成密文。与相关知名方案相比，该方案不仅提高密钥生成中心的密钥更新的效率，而且极大减少了轻量级设备的在线加密工作量，适合于轻量级设备保护用户隐私信息。     

贝叶斯网络查询语义扩展的专家发现方法

专家发现是实体检索领域的一个研究热点，针对经典专家发现模型存在索引术语独立性假设与检索性能低的缺陷，提出一种基于贝叶斯网络模型的专家发现方法。该方法模型采用四层网络结构，能够实现图形化的概率推理，同时运用词向量技术能够实现查询术语的语义扩展。实验结果显示该模型在多个评价指标上均优于经典专家发现模型，能够有效实现查询术语语义扩展，提高专家检索性能。     

基于LBT-SA的LoRaWAN信道接入方法研究

标准LoRaWAN协议中定义的纯ALOHA信道接入方法在网络负载较大时会造成大量碰撞，使LoRa网络的可扩展性和可靠性受到极大挑战。为此提出了一种将先听后说与模拟退火相结合（Listen Before Talk combined with Simulated Annealing，LBT-SA）的LoRa信道接入方法。该方法通过在设备发送之前先监听信道，降低信道被同时接入的概率，并以成功传输所需退避时间为初始值，搜索更小的退避时间。仿真结果表明，LBT-SA和基于二元指数退避算法的先听后说（Listen Before Talk，LBT）方法在包成功传输率方面保持了高度的一致，并且LBT-SA在周期传输过程中逐渐减少了不必要的退避时间，从而减少了时延。在多达10 000个终端接入单个网关的场景中，该算法的平均退避时间至少降低了16.38%。